If your Arlo device still isn’t found during setup: Once installation is complete, power on the access points again. For Mesh systems: If you are having difficulty connecting, try temporarily turning off the access points, and connect the camera to the main router first.For networks that have the same SSID for 2.4/5 GHz: Try temporarily disabling 5 GHz in the router settings.If your mobile device is connected to a mesh network, your Arlo device will not be able to connect to the 5 GHz band, so it will automatically connect to the 2.4 GHz band. Routers can use the same network name or SSID to broadcast both 2.4 GHz and 5 GHz WiFi networks.If your router uses the same WiFi network name or SSID for both 2.4 GHz and 5 GHz WiFi bands: Contact your Internet Service Provider (ISP), and ask for help connecting your mobile device to a 2.4 GHz WiFi network.If you need help with this, contact your router manufacturer. Try opening your router settings, and look for a 2.4 GHz WiFi network that your mobile device can connect to.If your WiFi network name or SSID doesn’t indicate whether it’s 2.4 GHz or 5 GHz: When your device is connected to the WiFi network, the word Connected appears under the network name. Enable WiFi by tapping Use WiFi at the top.Unlock your device and tap the Settings app.
Acrylic wifi pro 2.4 android#
To connect your Android device to a 2.4 GHz network: When you are connected to the WiFi network, a blue checkmark appears to the left of the network name.
Acrylic wifi pro 2.4 password#
If prompted, enter the password for the network.This is commonly indicated by a 2, 2.4, or 2G at the end of the network name or SSID. Note: WiFi is enabled when the WiFi button is green. Turn on WiFi by tapping the switch next to Wi-Fi at the top.Tap Wi-Fi, near the top of the list of settings options.To connect your iOS (Apple) device to a 2.4 GHz network: If you’re having trouble connecting and your WiFi network name doesn’t indicate whether it’s 2.4 GHz or 5 GHz, read the Troubleshooting section in this article. Some WiFi routers have only one WiFi network name that is used for both 2.4 GHz and 5 GHz WiFi bands. Your 5 GHz network name or SSID might have a 5 or 5G at the end.
![acrylic wifi pro 2.4 acrylic wifi pro 2.4](https://i.stack.imgur.com/Qqzgp.png)
Your 2.4 GHz network name or SSID might have a 2, 2.4, or 2G at the end.
![acrylic wifi pro 2.4 acrylic wifi pro 2.4](https://www.acrylicwifi.com/wp-content/themes/Avada-Child-Theme/images/acrylic_wifi_home_5gh_feature.jpg)
If you have both 2.4 GHz and 5 GHz WiFi networks: This is typically indicated by a 2, 2.4, or 2G at the end of the SSID. When connecting your mobile device and Arlo device to a WiFi network, ensure that you select the SSID that indicates it is a 2.4 GHz network.
![acrylic wifi pro 2.4 acrylic wifi pro 2.4](https://robots.net/wp-content/uploads/2020/03/NetSpot-600x310.jpg)
Note: The Arlo Video Doorbell, Pro 3 Floodlight Camera, Q, Q Plus, and Baby can connect directly to a 2.4 GHz WiFi network. This means that you must first connect your mobile device to your 2.4 GHz WiFi network, then connect your Arlo device to that same 2.4 GHz WiFi network during the setup process in the Arlo app. Your Arlo device directly connects to a 2.4 GHz WiFi network. Many routers broadcast WiFi networks in both 2.4 GHz and 5 GHz bands. If you are connecting an Arlo camera directly to a WiFi router-without an Arlo SmartHub or base station-you must connect your mobile device to your router’s 2.4 GHz band during the setup process.